|
The 12R5 Factory Team is the latest
evolutionary step in Associated's over twenty-five years of 1:12
scale racing history. The designers in Area-51 built the 12R5 on a
2.5mm woven carbon fiber chassis that utilizes a pivot-ball link rear
suspension that allows for independent adjustments for chassis roll,
bump and alignment. Having the ability to make these chassis
adjustments independently gives the 12R5 greater potential to get the
best possible handling from the car and the track surface.
The 12R5 features new shocks that have
a through-shaft design making for equalized damping throughout the
full stroke of the shock in both directions, without any unwanted
rebound. The center shock tower has four mounting positions that
split the spring rates for even finer adjustments. The new center
shock also controls the chassis droop and can be adjusted on the car
with a turnbuckle wrench, making it easier and quicker to get dialed
in.
The 12R5's 'Active Strut' front end has
been optimized, featuring symmetric components with adjustable caster
and track width, as well as a new front axle with wheel nut. Factory
Team blue aluminum servo mounts position the servo flat on the
chassis for a lower center of gravity and include Ackerman adjustment
spacers. The foam front bumper helps protect body and chassis during
impacts.
The 12R5 comes ready for
brushless featuring an optimized wide rear pod, woven carbon fiber
top plate and Factory Team blue aluminum machined motor mount and
left-side bulkhead. The woven carbon fiber top plate attaches to the
motor mount and left-side bulkhead at four points, making the 12R5's
rear pod more rigid and durable.
The demands and expectations of 1:12
scale race cars have never been higher. The 12R5 Factory Team not
only meets these demands and expectations but exceeds them with the
best 1:12 scale race car made by Team Associated to date. The 12R5
Factory Team is truly another champion by design.
|